; This file specifies default parameters to be used by the FlashUp.exe
; program.  Lines starting with a semicolon are considered comments
; and are ignorded by the FlashUp.exe program.

; LoggerFileXXX specifies the file name for an override of the default hex file for the differ logger models

;LoggerFile102=PEL102.hex
;LoggerFile103=PEL102.hex

LoggerFile105=PEL105.hex

LoggerFile104=PEL106.hex
LoggerFile106=PEL106.hex

LoggerFile112=PEL115.hex
LoggerFile113=PEL115.hex
;LoggerFile114=PEL115.hex
LoggerFile115=PEL115.hex
;LoggerFile116=PEL115.hex

; DspFile specifies the file name of the default bin file for the DSP
DspFile=PEL105_1.96.bin

; WiFiFile specifies the file name of the default firmware file for the WiFi module
;WiFiFile=wifi.dfu

; when set to 1 the Hex File button is displayed. otherwise it will be hidden.
ShowHexFileButton=1

; indicates the address of the start flash upgrade command register
StartFlashCmdAddr=61701

; indicates if the program is to automatically start a flash upgrade when it starts.
; 0 -> run normal
; 1 -> run automated
RunAuto=0

; indicates if the program should automatically exit when flash upgrade is complete.
; 0 -> do not exit when done
; 1 -> exit when done
ExitWhenDone=0

; indicates if the program displays only recognized instruments or all com ports
; 0 -> list only recognized instruments
; 1 -> list all serial ports
ShowAllComPorts=1

; indicates the default "Programming operation"
; 0 - Program logger and DSP
; 1 - Program logger only
; 2 - Program DSP only
; 3 - Program WiFi only
ProgOp=1
